Suitable for all levels from novice to experienced. The content and duration of the course will vary depending on experience and will reflect each individual’s requirements and abilities.
Read more
We are looking to recruit an Engineering Assessor in Engineering Construction Pipe Fitter (ST0162) or Pipe Welder (ST0185)
This is an excellent opportunity to join the successful team at The Engineering College delivering a high-quality learning experience to engineering students, ensuring they reach their maximum educational and developmental potential.
Read moreThis RTITB ForkLift Counterbalance Course, will include theory instruction and assessment followed by practical operator training and assessment which will comply with the standard laid down in accordance with the HSE code of practice L117.
Read moreSuitable for all levels from novice to experienced. The content and duration of the course will vary depending on experience and will reflect each individual’s requirements and abilities.
Read more
Technical Tests are the easiest way to ensure that the critical skills of craftspeople and technicians match the demand of today’s engineering industry. Technical Tests are for competent craftspeople and technicians who require immediate proof of the highly job-specific skills, knowledge and ability in defined task activities.
Read moreSuitable for all levels from novice to experienced. The content and duration of the course will vary depending on experience and will reflect each individual’s requirements and abilities.
Read moreThe first step in developing welder’s’ abilities in any process is to undertake a Welder Assessment. This is a one day session which takes place in our workshop with our CSWIP and TWI approved welding instructors.
Read moreOur coded welder training is specifically designed to suit each individual’s requirements, ensuring that the individual develops the skills in order to carry out welding tasks competently and to test standard.
Read moreThe Engineering College are now fully accredited as an approved TWI (The Welding Institute) Training Centre, meaning we can carry out our own inspections of test pieces. Our tutors are TWI certified to carry out training and examination of the test pieces.
Read moreThe CCNSG Renewal Test-Only is designed for delegates who already have a safety passport and serves as an alternative option to the CCNSG Renewal 1 Day Course. Candidates must take the online renewal test at the Engineering College within three months of the safety passport expiry date.
Read more
The Engineering College are now fully accredited as an approved TWI (The Welding Institute) Training Centre, meaning we can carry out our own inspections of test pieces. Our tutors are TWI certified to carry out training and examination of the test pieces.
Read moreThis course introduces individuals to basic welding techniques, supported by theoretical knowledge of the subject. It can cover MIG/MAG, TIG, MMA welding methods. Candidates who want to refresh their welding skills will also find this mainly practical course useful and help update their skills.
Read moreThis course is intended to develop the skills required to work safely with centre lathes. By the end of the course, delegates will have had instruction in the safe use of centre lathes and their appropriate tools/cutters and basic techniques using them to manufacture simple components. A certificate of attendance and competency will be given to those completing the course successfully.
Read moreThis course is aimed at any employee or individual required to work at height. Course attendees will gain a broad based training in the basic skills and techniques of working at heights to national standards.
Read moreThis course is intended for employees who are involved in Mechanical Joint Integrity and hand torque bolted connection activity in the workplace. This course is designed and structured to focus delegates on Mechanical Joint Integrity and the adoption of best practices in ensuring a leak-free ‘right first-time’ joint using hand torque bolted connection techniques
Read moreThis manual handling course has been designed with the core aim of providing people with the basic knowledge and skills to deal with manual handling safely.
Read moreThis course is aimed at all personnel who work near a Confined Space or who might be associated with Confined Space operations. This course is NOT suitable for any persons who MAY HAVE to enter a confined space; it does NOT TRAIN OR CERTIFY a person to enter a Confined Space.
Read moreThis course is aimed at all personnel who work near a Confined Space or who might be associated with Confined Space operations. This course is NOT suitable for any persons who MAY HAVE to enter a confined space; it does NOT TRAIN OR CERTIFY a person to enter a Confined Space.
Read moreTechnical Tests are the easiest way to ensure that the critical skills of craftspeople and technicians match the demand of today’s engineering industry. Technical Tests are for competent craftspeople and technicians who require immediate proof of the highly job-specific skills, knowledge and ability in defined task activities.
Read moreA Knowledge Only Test takes place at an ECITB approved Test Centre and typically lasts one hour. It is important before attending the test session to revise your knowledge of the subject area. You will be asked to show photo ID, provide your NI number, email address and complete the ECITB learner registration and privacy notice from. The Test Centre will take a digital photo of you for ECITB records. The test is taken on computer with no supporting materials or use of assistance from smart phones or your own tablet. The Test Centre will operate a clear desk policy and invigilate your test session.
Read moreThis course is intended to develop the skills required to work safely with hand and power tools. This course is designed to comply with the legislative requirements of persons involved in the safe use and care of hand held tools and power tools within a working environment, as required under Health & Safety legislation, PUWER etc.
Read moreThis course is intended to develop the skills required to work safely at height. Course attendees will gain broad-based training in the basic skills and techniques of working at heights to national standards.
Read moreThis course is designed for entering and working in a low risk environment with adequate natural or mechanical ventilation, the access appears simple and unobstructed and there is no likely risk of flooding (for example meter pits, valve chambers; stairwells). Low Risk confined spaces could be associated with lone working requiring the application of appropriate procedures.
Read moreThis course is designed for entering and working in a low risk environment with adequate natural or mechanical ventilation, the access appears simple and unobstructed and there is no likely risk of flooding (for example meter pits, valve chambers; stairwells). Low Risk confined spaces could be associated with lone working requiring the application of appropriate procedures.
Read moreThe CCNSG Renewal Test-Only is designed for delegates who already have a safety passport and serves as an alternative option to the CCNSG Renewal 1 Day Course. Candidates must take the online renewal test at the Engineering College within three months of the safety passport expiry date.
Read more
CCNSG Leading a Team Safely is a one day workshop designed to provide an essential introduction to managing small teams within the context of Health and Safety in the Engineering Construction Industry.
Read moreThe CCNSG Renewal Test-Only is designed for delegates who already have a safety passport and serves as an alternative option to the CCNSG Renewal 1 Day Course. Candidates must take the online renewal test at the Engineering College within three months of the safety passport expiry date.
Read moreThe CCNSG Renewal Course is a course for basic site safety. The CCNSG Safety Passport is valid for three years from the date of the course.
Read moreThe CCNSG National Course is a two day course for basic site safety. The CCNSG National Course is valid for three years from the date of the course.
Read moreACE is an important initiative designed to ensure that the competence of workers in the UK Engineering Construction Industry is validated against National Occupational Standards in a flexible way, with minimum disruption to on-going productivity. Regulatory changes and client expectations now require the vast majority of the people involved in construction, operation, repair and maintenance of process facilities to have proven technical competence.
Read more
This course is designed and structured to provide training in the safe use of abrasive wheels and meets with requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER 98)
Read moreThis course is designed and structured to provide training in the safe use of abrasive wheels and meets with requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER 98)
Read moreThis course is intended to develop the skills required to understand the operation of Abrasive wheels tools and machinery.This course is designed and structured to provide training in the safe use of abrasive wheels and meets with requirements of the Provision and Use of Work Equipment Regulations 1998 (PUWER 98)
Read moreA mix of theory and practical training, this course is designed to enable operators to manoeuvre, drive and position the MEWPs safely and proficiently. Courses can be undertaken on scissor lifts, boom lifts, trailer mounted or truck mounted platforms.
Read moreThis RTITB ForkLift Truck Reach Course, will include theory instruction and assessment, in accordance with the HSE code of practice L117
Read more
